Hydrogen Storage and Transportation
| Water Capacity litre |
Nominal Diameter mm |
Working Pressure bar |
Standard Regulations |
Comments |
| 2,5 | 115 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 5 | 140 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 9 | 175 | 300 | EN 12245(TPED) | Type 4 Carbon Fibre See note (x) |
| 10 | 178 | 300 | EN 1964-1:1999 (TPED) | Type 1 Steel See note (x) |
| 10 | 220 | 200 | ISO 9809-1:1999 (PED) | Type 1 Steel |
| 11 | 176 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 12 | 197 | 350 | ISO 9809-1:2010 | Type 1 Steel |
| 12 | 197 | 350 | EN ISO 9809-1:2010 (TPED) | Type 1 Steel See note (x) |
| 15 | 220 | 200 | ISO 9809-1:1999 (PED) | Type 1 Steel |
| 15 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 15 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 15 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 15 | 244 | 550 | ISO 9809-1:2010 (PED) | Type 1 Steel |
| 15 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 20 | 203 | 200 | ISO 9809-1:2010 | Type 1 Steel |
| 20 | 203 | 300 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 20 | 211 | 300 | ISO 11119-1 (TPED) | Type 2 Carbon Fibre See note (x) |
| 20 | 220 | 200 | ISO 9809-1:1999 (PED) | Type 1 Steel |
| 20 | 229 | 300 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 20 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 20 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 20 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 20 | 244 | 550 | ISO 9809-1:2010 (PED) | Type 1 Steel |
| 20 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 20 | 256 | 850 | EN 12257(TPED) | Type 2 Carbon Fibre See note (x) |
| 20 | 256 | 850 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 20 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 20 | 262 | 1000 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 20 | 262 | 1000 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 20 | 262 | 1000 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 20 | 262 | 1000 | EN 12257 FOR AUSTRALIA | Type 2 Carbon Fibre |
| 20 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 20 | 262 | 1000 | ISO 11119-1 (AUS+NZ+TS) | Type 2 Carbon Fibre |
| 20 | 262 | 1000 | EN 12257 FOR AUSTRALIA | Type 2 Carbon Fibre |
| 20 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 20 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 20 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 25 | 220 | 200 | ISO 9809-1:1999 (PED) | Type 1 Steel |
| 25 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 25 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 25 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 25 | 244 | 550 | ISO 9809-1:2010 (PED) | Type 1 Steel |
| 25 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 26,5 | 270 | 350 | JARI S 001 (2004) | Type 3 Carbon Fibre |
| 27 | 230 | 450 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 27 | 230 | 450 | EN 12257(TPED) | Type 2 Carbon Fibre See note (x) |
| 27 | 230 | 450 | EN 12257(PED) | Type 2 Carbon Fibre |
| 27,5 | 299 | 350 | ISO 9809-1:2010 | Type 1 Steel |
| 27,5 | 299 | 350 | EN ISO 9809-1:2010 (TPED) | Type 1 Steel See note (x) |
| 28 | 255 | 50 | EN ISO 9809-1:2010 (PED) | Type 1 Steel |
| 30 | 220 | 200 | ISO 9809-1:1999 (PED) | Type 1 Steel |
| 30 | 229 | 200 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 30 | 229 | 200 | EN 1964-1:1999 (TPED) | Type 1 Steel See note (x) |
| 30 | 229 | 200 | ISO 9809-1:1999 FOR RUSSIA | Type 1 Steel |
| 30 | 229 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 30 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 30 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 30 | 230 | 230 | EN 12257(TPED) | Type 2 Carbon Fibre See note (x) |
| 30 | 230 | 230 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 30 | 230 | 450 | EN 12257(TPED) | Type 2 Carbon Fibre See note (x) |
| 30 | 230 | 450 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 30 | 230 | 450 | EN 12257(PED) | Type 2 Carbon Fibre |
| 30 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 30 | 244 | 550 | ISO 9809-1:2010 (PED) | Type 1 Steel |
| 30 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 30 | 299 | 350 | EN ISO 9809-1:2010 (TPED) | Type 1 Steel See note (x) |
| 30 | 299 | 350 | ISO 9809-1:2010 | Type 1 Steel |
| 30 | 299 | 438 | ISO 19881 (PED) | Type 1 Steel |
| 30 | 299 | 438 | ISO 19881 (PED) | Type 1 Steel |
| 31 | 299 | 438 | ISO 19881 (PED) | Type 1 Steel |
| 32,5 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 32,5 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 33 | 229 | 200 | ISO 9809-1:1999 FOR RUSSIA | Type 1 Steel |
| 33 | 229 | 200 | EN 1964-1:1999 (TPED) | Type 1 Steel See note (x) |
| 33 | 229 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 35 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 35 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 35 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 35 | 244 | 550 | ISO 9809-1:2010 (PED) | Type 1 Steel |
| 35 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 40 | 220 | 200 | ISO 9809-1:1999 (PED) | Type 1 Steel |
| 40 | 229 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 40 | 229 | 200 | EN 1964-1:1999 (TPED) | Type 1 Steel See note (x) |
| 40 | 229 | 200 | ISO 9809-1:1999 FOR RUSSIA | Type 1 Steel |
| 40 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 40 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 40 | 230 | 450 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 40 | 230 | 450 | EN 12257(TPED) | Type 2 Carbon Fibre See note (x) |
| 40 | 230 | 450 | EN 12257(PED) | Type 2 Carbon Fibre |
| 40 | 244 | 550 | ISO 9809-1:2010 (PED) | Type 1 Steel |
| 40 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 40 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 40,2 | 229 | 200 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 40,5 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 40,5 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 40,5 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 40,5 | 262 | 1000 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 40,5 | 262 | 1000 | EN 12257 FOR AUSTRALIA | Type 2 Carbon Fibre |
| 42 | 244 | 500 | JPN HIGH PRES. LAW DES. EQUIP. | Type 1 Steel |
| 42 | 299 | 438 | ISO 19881 (PED) | Type 1 Steel |
| 43,2 | 229 | 200 | ISO 9809-1(DOT-UN+TPED+AUS+TS) | Type 1 Steel |
| 43,2 | 229 | 200 | ISO 9809-1:2010 | Type 1 Steel |
| 43,2 | 229 | 200 | EN ISO 9809-1:2010 (TPED) | Type 1 Steel See note (x) |
| 45 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 45 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 45 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 45 | 244 | 550 | ISO 9809-1:2010 (PED) | Type 1 Steel |
| 45 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 46 | 244 | 500 | JPN HIGH PRES. LAW DES. EQUIP. | Type 1 Steel |
| 46,5 | 320 | 300 | EN 12245(TPED) | Type 4 Carbon Fibre See note (x) |
| 46,5 | 320 | 300 | EN 12245 | Type 4 Carbon Fibre |
| 46,7 | 229 | 200 | EN 1964-1:1999 (TPED) | Type 1 Steel See note (x) |
| 46,7 | 229 | 200 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 46,7 | 229 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 46,7 | 229 | 200 | ISO 9809-1:1999 FOR RUSSIA | Type 1 Steel |
| 47 | 229 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 47 | 229 | 200 | EN 1964-1:1999 (TPED) | Type 1 Steel See note (x) |
| 47 | 229 | 200 | ISO 9809-1:1999 FOR RUSSIA | Type 1 Steel |
| 47 | 266 | 1100 | EN 12257(PED) | Type 2 Carbon Fibre |
| 47 | 267 | 1000 | EN 13445 (PED) | Type 1 Steel |
| 47,4 | 229 | 150 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 47,4 | 229 | 200 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 47,5 | 244 | 550 | ASME SECT. VIII DIV.3 ED. 2021 | Type 1 Steel |
| 47,5 | 244 | 550 | ASME SECT. VIII DIV.1 ED.2019 | Type 1 Steel |
| 47,5 | 244 | 550 | ASME SECT. VIII DIV.1 ED.2019 | Type 1 Steel |
| 48 | 244 | 550 | ASME SECT. VIII DIV.3 ED.2017 | Type 1 Steel |
| 48 | 264 | 1050 | EN 12257(PED) | Type 2 Carbon Fibre |
| 48 | 266 | 1100 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 48 | 266 | 1100 | EN 12257(PED) | Type 2 Carbon Fibre |
| 49 | 229 | 200 | ISO 9809-1:2010 | Type 1 Steel |
| 49 | 229 | 200 | EN ISO 9809-1:2010 (TPED) | Type 1 Steel See note (x) |
| 49 | 229 | 200 | ISO 9809-1(DOT-UN+TPED+AUS+TS) | Type 1 Steel |
| 50 | 220 | 200 | ISO 9809-1:1999 (PED) | Type 1 Steel |
| 50 | 229 | 180 | EN 1964-1:1999 (TPED) | Type 1 Steel See note (x) |
| 50 | 229 | 180 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 50 | 229 | 180 | DOT 3AA | Type 1 Steel |
| 50 | 229 | 200 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 50 | 229 | 200 | ISO 9809-1:1999 FOR RUSSIA | Type 1 Steel |
| 50 | 229 | 200 | EN ISO 9809-1:2010 (PED) | Type 1 Steel |
| 50 | 229 | 200 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 50 | 229 | 200 | EN 1964-1:1999 (TPED) | Type 1 Steel See note (x) |
| 50 | 229 | 200 | ISO 9809-1:1999 FOR AUSTRALIA | Type 1 Steel |
| 50 | 229 | 300 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 50 | 229 | 310 | ISO 9809-1:1999 (TPED) | Type 1 Steel See note (x) |
| 50 | 229 | 330 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 50 | 229 | 350 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 50 | 230 | 230 | EN 12257(TPED) | Type 2 Carbon Fibre See note (x) |
| 50 | 230 | 230 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 50 | 230 | 450 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 50 | 230 | 450 | EN 12257(PED) | Type 2 Carbon Fibre |
| 50 | 230 | 450 | EN 12257(TPED) | Type 2 Carbon Fibre See note (x) |
| 50 | 244 | 450 | JPN HIGH PRESS.LAW-1998(APP.1) | Type 1 Steel |
| 50 | 244 | 550 | ISO 9809-1:2010 | Type 1 Steel |
| 50 | 244 | 550 | EN ISO 9809-1:2010 FOR AUSTRAL | Type 1 Steel |
| 50 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 50 | 244 | 550 | ISO 9809-1:2010 (PED) | Type 1 Steel |
| 50 | 244 | 550 | EN ISO 9809-1:2019 (PED) | Type 1 Steel |
| 50 | 244 | 550 | EN ISO 9809-1:2010 (TPED) | Type 1 Steel See note (x) |
| 50 | 252 | 310 | ISO 11119-1:2012 | Type 2 Carbon Fibre |
| 50 | 252 | 310 | ISO 11119-1 (DOT-UN) | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | EN 12257 FOR AUSTRALIA | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 50 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | EN 12257(PED) | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | ISO 11119-1 (AUS+NZ+TS) | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | EN 12257 FOR AUSTRALIA | Type 2 Carbon Fibre |
| 50 | 262 | 1000 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 50 | 266 | 1100 | EN 12257(PED) | Type 2 Carbon Fibre |
| 50 | 266 | 1100 | EN 12257 | Type 2 Carbon Fibre For EU see note (y) |
| 50 | 267 | 200 | ISO 9809-1:2010 | Type 1 Steel |
| 50 | 267 | 1000 | EN 13445 (PED) | Type 1 Steel |
| 50 | 299 | 438 | ISO 19881 (PED) | Type 1 Steel |
How To Recognize Faber Cylinders
Standards and Regulations of all countries require the name of the manufacturer, or its code, or its symbol, to be stamped on to the shoulder of the cylinder. Cylinders (and accumulator shells) produced by Faber Industrie SpA are stamped "FABER". However, when made to the US regulations they are stamped "M8303" which is the code allocated to Faber by the US Competent Authority, DOT. Next time you purchase a cylinder look for the "FABER" stamp on it (or for its code). If you do not purchase cylinders but you work with them or you use them for leisure or maybe for health care applications, you too should become familiar with the "FABER" stamping on the cylinders too. With good maintenance and looking after a cylinder stamped "FABER" you will enjoy many years of its safe use.